Plastic pallet boxes are the ideal solution for storing and transporting products and bulk goods – provided the containers are robust, stackable, easy to transport and easy to clean. The new SB3 pallet box from Craemer meets all of these requirements. Its single-mould production and stable construction make it very durable. The Craemer pallet box SB3 is made of high-quality, food-safe polyethylene and is available in industrial dimensions (1,200 x 1,000 mm). The 790 millimetres high container has a capacity of 610 litres and a payload of 700 kilograms. The SB3 is available in a closed or perforated version, with three runners or nine feet. Depending on the version, it weighs 38.5 or 43.5 kilograms. Thanks to its design, the one-piece, injection moulded SB3 offers numerous advantages. The particularly stable runner or foot connection ensures extreme resistance and, with the former version, secure lift-tilt emptying by a rotating forklift. Additional ribs on the outer walls provide increased impact protection against forklift tines, while the all-round stacking shoulder in the upper and lower edge make the container compatible with a large number of other containers (Euro stacking system). The seamless construction and the smooth inner surfaces enable easy emptying, cleaning and drying. The vents of the perforated version are chamfered on the inside to protect sensitive goods. The SB3 is temperature-resistant from -30 to +40 degrees Celsius, briefly up to +90 degrees, and it complies with the European container standards DIN EN 13626 and DIN EN ISO 12048. The SB3 is optionally available with two closed or open drain ports. The integrated 1-inch or 2-inch thread and a drilling mark make it easier to open the holes later if necessary. Two transponder brackets enable retrofitting with RFID tags, and printing fields offer space for an individual logo, lettering or numbering. The SB3 is rounded off by a custom-fit lid, which is available as additional equipment.

The German Craemer Group is presenting its latest product development: the large-volume CB3 High pallet box with a capacity of around 1,000 litres. The CB3 High was designed specifically to allow for even more efficient transport of particularly large quantities or bulky goods. The large load carrier is moulded in one piece and boasts a high level of stability and resistance, while the sophisticated design ensures everyday ease of use. The CB3 High pallet box is made of high-quality, food-safe polyethylene, is available in industrial dimensions (1,200 x 1,000 millimetres) with three longitudinal runners or nine feet and weighs 46.5 or 49.5 kilograms. With a height of 1,140 millimetres and a capacity of around 1,000 litres, the CB3 High offers significantly more interior volume than most other pallet boxes. Single-mould production ensures a robust runner or foot connection; additional ribs above the entry openings of the closed outer walls offer increased protection against forklift tines and the strong ribbing of the lower deck ensures that the bottom of the container is very robust. Integrated stacking cams on the outside corners lock with the stacking pockets in the bottom, ensuring stacked boxes are firmly secured. The CB3 High is temperature resistant from -30 to +40 degrees Celsius, and even up to +90 degrees for a short time. The seamless construction and smooth inner walls mean it is easy to clean and dry. The new, large-volume pallet box from Craemer is optionally available with lateral trunnions for effortless lift-tilt emptying. As an option, the CB3 High is also available with an open 1-inch and 2-inch drain port hole, and if necessary, markings facilitate drilling of the standard closed holes with integrated thread. A transponder bracket on each of the long sides enables optional retrofitting with RFID tags, and printing fields offer space for an individual logo, lettering or numbering. A custom-fit lid is available as additional equipment.

Promotional packs are easy to create using banding. With the same ease we bundle two, four, six or more cans of fish or a bundle of packs of ham, soup or chocolate bars. A band in your own corporate style gives the promotional packaging even more consumer attraction and therefore a higher likelihood of being picked up in-store. A boost on all fronts Using banding promotional packaging can be created in no time at all Much less expensive than shrink wrap, both in terms of energy consumption and material costs The band also immediately becomes a seal Good for the environment Easy to remove Reliable packaging

The patented circular to linear motion design gently handles the product so it is undamaged and the coatings are undisturbed, providing the ultimate performance and flexibility and the industry’s highest travel rates and flow rate capacity. The FastBack 4.0 streamlined and robust design has higher capacity, cleans easily, runs quietly, and has 70% fewer moving parts. With no pinch points or moving arms to cover and to protect, the working environment is safer and more streamlined. BEAUTIFULLY SIMPLE.

Optimize your production flow with feeding systems tailored to your needs. From dosing and separating to precise positioning, Romédes enhances speed and efficiency for every unique process.

“Fiber Film from Topa! This wrapping film is stronger, thinner and more elastic and requires fewer wraps. In combination with the light and ergonomically designed Fiber Wrapper, you reduce absenteeism due to illness. But Fiber Film has many more advantages." Fiber Film, in combination with the Fiber Wrapper, prevents injuries and absenteeism due to illness The strong, thin and stretchable Fiber Film in combination with the remarkably light design of the Fiber Wrapper ensures an ergonomically sound wrapping process. In fact, wrapping a pallet hardly requires any force. For comparison: with a standard stretch film it takes thirty kilos of tensile force to achieve 10% stretch. With the Fiber Film and Fiber Wrapper, seven kilos of tensile force already provides 30% stretch. Converted, the Fiber Film and Fiber Wrapper are more than ten times lighter to use. This places much less strain on muscles in the wrist, arm and shoulder and prevents injuries and absenteeism due to illness. The Fiber Film wrapping film is not only thinner. The film also increases pallet stability to the level of the Eumos 40509 guidelines. This is due to the reinforced horizontal fibers (wires). Partly due to the use of the Fiber Wrapper, the Fiber Film fits tighter around the load. This provides a greater holding force and prevents sliding. The Fiber Film therefore significantly reduces the risk of damage to the transported products. Fiber Film, in combination with the Fiber Wrapper, is 60% more durable and delivers 30% savings Due to its unique structure, the Fiber Film is considerably thinner, but thanks to special fibers it is stronger than conventional foil. As a result, far fewer windings are required, a roll lasts longer, the process is faster, it costs less film to wrap a pallet, and you reduce your costs per pallet by up to 30%. Thanks to this significantly lower consumption and the fact that this film is fully recyclable, you reduce your CO2 footprint by up to 60%!

“Fiber Film from Topa! This wrapping film is stronger, thinner and more elastic and requires fewer wraps. In combination with the light and ergonomically designed Fiber Wrapper, you reduce absenteeism due to illness. But Fiber Film has many more advantages." Fiber Film, in combination with the Fiber Wrapper, prevents injuries and absenteeism due to illness The strong, thin and stretchable Fiber Film in combination with the remarkably light design of the Fiber Wrapper ensures an ergonomically sound wrapping process. In fact, wrapping a pallet hardly requires any force. For comparison: with a standard stretch film it takes thirty kilos of tensile force to achieve 10% stretch. With the Fiber Film and Fiber Wrapper, seven kilos of tensile force already provides 30% stretch. Converted, the Fiber Film and Fiber Wrapper are more than ten times lighter to use. This places much less strain on muscles in the wrist, arm and shoulder and prevents injuries and absenteeism due to illness. The Fiber Film wrapping film is not only thinner. The film also increases pallet stability to the level of the Eumos 40509 guidelines. This is due to the reinforced horizontal fibers (wires). Partly due to the use of the Fiber Wrapper, the Fiber Film fits tighter around the load. This provides a greater holding force and prevents sliding. The Fiber Film therefore significantly reduces the risk of damage to the transported products. Fiber Film, in combination with the Fiber Wrapper, is 60% more durable and delivers 30% savings Due to its unique structure, the Fiber Film is considerably thinner, but thanks to special fibers it is stronger than conventional foil. As a result, far fewer windings are required, a roll lasts longer, the process is faster, it costs less film to wrap a pallet, and you reduce your costs per pallet by up to 30%. Thanks to this significantly lower consumption and the fact that this film is fully recyclable, you reduce your CO2 footprint by up to 60%!

Allround-Engineering offers a new GMP series of filling machines for filling pasty and liquid products. From semi-automatic setups for penetrating liquids to integrated in a line. Quick cleaning and accurate dosing are the key-words for these machines. A unique design makes it possible to use the machine for dosing pasty products for top filling and with changeable head to use the same machine for liquid filling with diving nozzle from the bottom to avoid foaming. Easy cleaning, simple operation and high dosing accuracy for a good price.

Film for Various Food Products At Bema, we offer a wide range of different films. You can rely on us for: Mono film Laminated film Bottom film PA/PE & PA/PP film Top film

Dual-purpose packaging. Many transport or case packages are also the sales packages and thus must be attractive and of high quality as well as robust and easy to handle. High package diversity needs to be taken in account. Even unusual pack styles are achieved by the large variation possibilities of the final packaging machines. For these diverse packaging requirements, we supply the appropriate end-of-line packaging machines, such as the Final Packaging Machine EF (American Case Packer), Final Packaging Machine ELS (Side Loader for filling transport packages), Final Packaging Machine ECL (for closing cartons with a separate lid), and the Final Packaging Machine ET (for trays). These machines enable flexible and efficient packaging, regardless of the style or application of the package.

Dual-purpose packaging. Many transport or case packages are also the sales packages and thus must be attractive and of high quality as well as robust and easy to handle. High package diversity needs to be taken in account. Even unusual pack styles are achieved by the large variation possibilities of the final packaging machines. For these diverse packaging requirements, we supply the appropriate end-of-line packaging machines, such as the Final Packaging Machine EF (American Case Packer), Final Packaging Machine ELS (Side Loader for filling transport packages), Final Packaging Machine ECL (for closing cartons with a separate lid), and the Final Packaging Machine ET (for trays). These machines enable flexible and efficient packaging, regardless of the style or application of the package.

Discover the latest slicing technologies from Finova slicers at Het Packhuys. Finova guarantees innovative, safe, efficient and accurate machines, perfectly tailored to your meat, fish and cheese processing. Whether you opt for a fully automatic cutting solution or a stand-alone slicer for your products – we offer the ideal solution for your business.

Flat bags with 2 or 3 seals are especially used for the fish, meat and cheese industry. These bags can be provided with a reclosable ZIP.