
Allround Engineering
About us
Supplier of production machines, filling machines and labeling machines.
Products

Neweco NZT-100 tube closingmachine / tubeclosingmachine / tubefilling / Tubes
Device used for hot air sealing of PE or laminated tubes, previously filled with gels, creams or other fluids and stamping date or batch No. on them. The device is operated by one person, whose task is to insert filled tubes, position them and remove tubes after they are sealed. KEY FEATURES • The device is made of stainless steel AISI 304 • Unitronics PLC controller • Camozzi and MetalWork pneumatic elements • Air heater with automatic setting of temperature • Sensor of air temperature • Laser pointers which help the operator to position tubes • Single or dual sided coding with set of fonts included • Tester of tube sealing strength The machine is on display in our showroom. For more information or an appointment please see our contact information.

Neweco NTT-200 tube fillingmachine / Tubeclosingmachine / Tube filling machine/ Tube closingmachine / Tubes
Machine used for filling of PE or laminated tubes with gels, creams or other fluids, sealing them with hot air, stamping date or batch No. and cutting excess plastic on the tube ending, which arises during tube sealing. The machine works in semi-automatic mode - that is all operations except for inserting, positioning and moving of tubes are done automatically. Process parameters: * Volume of reservoir 25 liters * Tube diameter ø 10 mm – ø 50 mm * Tube height can be adjusted in range 50 – 250 mm * Dosing volume (cylinder volume of filling device) 7-250 ml * Output up to 900 pcs./h (depends on operator, tube volume and tube sealing time) The machine is on display in our showroom. For more information or an appointment please see our contact information.

Manual capclosingmachine / cappingmachine / cap closing machine / caps
These shutters are produced in England. The cap closers are completely pneumatic. This version starts automatically if the closing head experiences resistance as soon as it is pressed onto the cap. (push start) The capping machines have a large torque range, are very effective and have a low vibration level. Very ergonomic model with low noise. The design of the new capping machines have low reaction forces with high repeatability.

Semi- automatic fillingmachine / GMP fillingmachine / fillingmachine / dosingmachine / food / cosmetics / pharma / chemical
Allround-Engineering offers a new GMP series of filling machines for filling pasty and liquid products. From semi-automatic setups for penetrating liquids to integrated in a line. Quick cleaning and accurate dosing are the key-words for these machines. A unique design makes it possible to use the machine for dosing pasty products for top filling and with changeable head to use the same machine for liquid filling with diving nozzle from the bottom to avoid foaming. Easy cleaning, simple operation and high dosing accuracy for a good price.

Filling machine on wheels
Allround-Engineering offers a new GMP series of filling machines for filling pasty and liquid products. From semi-automatic setups for penetrating liquids to integrated in a line. Quick cleaning and accurate dosing are the key-words for these machines. A unique design makes it possible to use the machine for dosing pasty products for top filling and with changeable head to use the same machine for liquid filling with diving nozzle from the bottom to avoid foaming. Easy cleaning, simple operation and high dosing accuracy for a good price.

2- head filling machine vacuüm / fillingmachine / filling machine / parfum fillingmachine
Two nozzles vacuum pneumatic filling machine, able to fill liquid in all different bottle shapes and capacities through the use of vacuum. This unit is complitely pneumatical operated, no electrical parts are involved. Cost efficiency and minimum maintenance are main characteristics. The machine is on display in our showroom. For more information or an appointment please see our contact information.
2- head automatic fillingmachine / GMP fillingmachine / automatic filling line
The stand-alone VOLUMETRIC LINEAR FILLER model VOL MEC 2 is suitable to fill PLASTIC / PET / GLASS BOTTLES with liquids, by means of a 2 nozzles / dosing unit linear flier. Compete bottle conveyor, electric box in S / S AISI 304 and all necessary parts, projected and built in accordance with the latest EEC norms.

AXO 800 Tubefillingmachine / Axomatic / Tube closingmachine / Tube fillingmachine / Tubes
Allround Engineering BV offers a range of automatic machines for filling and closing of both plastic and aluminium tubes. The machines are ranging from semi-automatic models where the tube is manually deployed and aligned, to fully automatic models with capacities up to 200 tubes per minute. The machines are very flexible. There can be several different sizes of tubes and different products processed on the same machine. The size parts can be changed without using any tools and the conversion time is no longer than 10 minutes. The advantages of an automatic tube filling machine: - Fast product change - Quick format change without tools - Automatic settings with product memory - Compact construction - New quick conversion method from plastic to an aluminium locking head - Ergonomic design - High quality robust construction of the machine and driving - Good price / performance ratio - Labelling / laser coding / inkjet of the tube inline The machine is on display in our showroom. For more information or an appointment please see our contact information.

Vertipack cartonningmachine / Vertical cartonningmachine / Boxes / cartons
Cantilever vertical cartoner. The vertical, intermittent motion, cartoning machine Vertipack has been particularly designed for the cosmetic and pharmaceutical field. It certainly represents an innovation in its conception thanks to the following main characteristics: - Construction arranged In-line: hence easy acces to all working stations for operators - Carton advancement by means of 4 toothed belts - Cantilever construction - Carton erection: carried out with the use of a special double suction cups arm that ensures the erection of square section or low grammage boads - Size changeover: has been designed to be achieved in max. 10 min. in a very easy and functional manner with the use of digital indicators and replacement of parts in fixed position (sizeparts).

Allround TP01 Cap closingmachine
Flexible and very accurate semi- automatic cap closing machine. The machine is on display in our showroom. For more information or an appointment please see our contact information.

Miniline fillingmachine / closingmachine
The MINILINE machine is built for packaging liquid perfume products. The liquid is filled into bottles, and then sealed with caps of various shapes and sizes. It has the following construction: - main aluminum structure - 16 station rotary star wheel for bottle step movement - manual bottle infeed Motion is operated pneumatically and managed by an electronic system which simulates a series of mechanical cams. The control system is contained in a pulpit connected closely to the main structure of the machine. The electric motor supply and control panel is also fitted on the same structure. The Automatic machine Miniline can be fitted with: - Filling station made by no.2 filling pistons of 30ml each - Pressing station - Screw tightening station - Crimping station Dimensions: 74,5x61 cm Height: 160 cm + adjustable feet Net weight: 100 kg Electrical system Supply voltage: 230 V 1P N PE Frequency: 50 Hz Maximum power: 0,1 kVA Pneumatic system Minimum pressure: 4 bar Recommended pressure: 6 bar
AXO 1000 Tubefillingmachine / Axomatic / Tube closingmachine / Tube fillingmachine / Tubes
Allround Engineering BV offers a range of automatic machines for filling and closing of both plastic and aluminium tubes. The machines are ranging from semi-automatic models where the tube is manually deployed and aligned, to fully automatic models with capacities up to 200 tubes per minute. The machines are very flexible. There can be several different sizes of tubes and different products processed on the same machine. The size parts can be changed without using any tools and the conversion time is no longer than 10 minutes. The advantages of an automatic tube filling machine: - Fast product change - Quick format change without tools - Automatic settings with product memory - Compact construction - New quick conversion method from plastic to an aluminium locking head - Ergonomic design - High quality robust construction of the machine and driving - Good price / performance ratio - Labelling / laser coding / inkjet of the tube inline The machine is on display in our showroom. For more information or an appointment please see our contact information.
AXO 2400 Tubefillingmachine / Axomatic / Tube closingmachine / Tube fillingmachine / Tubes
Allround Engineering BV offers a range of automatic machines for filling and closing of both plastic and aluminium tubes. The machines are ranging from semi-automatic models where the tube is manually deployed and aligned, to fully automatic models with capacities up to 200 tubes per minute. The machines are very flexible. There can be several different sizes of tubes and different products processed on the same machine. The size parts can be changed without using any tools and the conversion time is no longer than 10 minutes. The advantages of an automatic tube filling machine: - Fast product change - Quick format change without tools - Automatic settings with product memory - Compact construction - New quick conversion method from plastic to an aluminium locking head - Ergonomic design - High quality robust construction of the machine and driving - Good price / performance ratio - Labelling / laser coding / inkjet of the tube inline The machine is on display in our showroom. For more information or an appointment please see our contact information.

AXO Perfecta GMP automatic fillingmachine / filling machine
Volumetric filling machine having a pneumatic running suitable for dosing liquid, and cream product for cosmetics, pharmaceutical and food industries, to fill STABLE CONTAINERS. - the empty containers are positioned on the rotating table, they are conveyed to an automatic device which stop the machine with the filling below the filling nozzle. After the filling on the rotating table the containers reaches the postion on the discharge side - dosing range between 10 to 1100 ml - adjusting dosing volume also when the machine is moving - easy dismounting and cleaning of the parts in contact with the product tanks to triclamp - machine body covers completely in Stainless Steel AISI 304L with a proper glazing type “Scoth Brite TM” - all the parts in contact with the product in AISI 316L - simple hopper with cover in AISI 316L mirror polished inside and outside 200 granes (maximum capacity 25 Lt.) - possibility to have different versions with heated hopper and stirrer to make easier the filling for thick products - detailed instruction manual including functioning schemes detailed for the spare parts.

AXOMIX 5 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Mechanical lifting of the cover - Mechanical vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. - Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam - Vacuum mixer for laboratories. - slow mixing and homogenizing turbine - Touch & screen colour command panel to see the main machine functions. - Motorised cover raising - Recipient tipping to make finished product unloading easier. - hopper for essences - printer - different optionals are available for customer satisfaction: - check weighters - spyhole and light for inspecting during the mixing phase - valves for raw material loading or final product discharge

AXOMIX 10 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Mechanical lifting of the cover - Mechanical vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. - Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam - Vacuum mixer for laboratories. - slow mixing and homogenizing turbine - Touch & screen colour command panel to see the main machine functions. - Motorised cover raising - Recipient tipping to make finished product unloading easier. - hopper for essences - printer - different optionals are available for customer satisfaction: - check weighters - spyhole and light for inspecting during the mixing phase - valves for raw material loading or final product discharge

AXOMIX 25 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Mechanical lifting of the cover - Mechanical vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. - Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam - Vacuum mixer for laboratories. - slow mixing and homogenizing turbine - Touch & screen colour command panel to see the main machine functions. - Motorised cover raising - Recipient tipping to make finished product unloading easier. - hopper for essences - printer - different optionals are available for customer satisfaction: - check weighters - spyhole and light for inspecting during the mixing phase - valves for raw material loading or final product discharge

AXOMIX 50 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Mechanical lifting of the cover - Mechanical vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. - Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam - Vacuum mixer for laboratories. - slow mixing and homogenizing turbine driven from the bottom - Touch & screen colour command panel to see the main machine functions. - Motorised cover raising - Recipient tipping to make finished product unloading easier. - hopper for essences - printer - different optionals are available for customer satisfaction: - check weighters - spyhole and light for inspecting during the mixing phase - valves for raw material loading or final product discharge

AXOMIX 150 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Hydraulic lifting of the cover - Hydraulic vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam

AXOMIX 300 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Hydraulic lifting of the cover - Hydraulic vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam

AXOMIX 1000 Lt Undervacuum homogenizer / proces mixing vessel
- Contra-rotating slow mixing with teflon scrapers - Homogenizing turbine (speed up to 3.000 rpm) - Control Panel T&S color kind to show all the main machine. - Hydraulic lifting of the cover - Hydraulic vessel tilting to facilitate the finished product discharge - Essences little hopper - Central bottom valves to suck undervacuum raw material or discharge the finished product. - Inspection window with light to check the mixing phases. Different optionals available to satisfy the different customer needs such as: - Check weighters - cleaning system by spray balls - printing of production data - heating by steam - Vacuum mixer for laboratories. - slow mixing and homogenizing turbine driven from the top - Touch & screen colour command panel to see the main machine functions. - Motorised cover raising - Recipient tipping to make finished product unloading easier. - hopper for essences - printer - different optionals are available for customer satisfaction: - check weighters - spyhole and light for inspecting during the mixing phase - valves for raw material loading or final product discharge

Allround UTK 1 automatic cap closingmachine
The stand-alone capper model TK 1 PF PP is suitable to close PET / PLSTIC BOTTLES with a PRE-THREADED PLASTIC CAPS by a single-head capping turret. Complete of one set of parts for one ( 1 ) bottle and one ( 1 ) cap size, cap sorter, electric box in S / S AISI 304 , conveyor in S/S AISI 304 ( not motorized ) and all necessary parts, projected and built in accordance with the latest EEC norms.

Allround UTK 3 automatic cap closingmachine
The stand-alone capper model TK 3 PF PP is suitable to close PET / PLASTIC BOTTLES with a PRE-THREADED PLASTIC CAPS by a 3 HEADS CAPPER. Complete of one set of parts for one ( 1 ) bottle and one ( 1 ) cap size, cap sorter, electric box in S / S AISI 304 , conveyor in S/S AISI 304 ( not motorized ) and all necessary parts, projected and built in accordance with the latest EEC norms.
Nailcollor filling machine / Nail polish filling machine
This machine is suited to fill at level products, such us nail polish/fragrances and solvents. The machine is made of stainless steel AISI 304 and is complete with a glass tank placed on the back of the machine. A suction hose connects the machine to the tank of the product, a second hose connects the dosing group to the tank of the glass. Overplus of product is automatically sucked by the dosing nozzle and piped into the glass accumulation tank placed on the back of the machine (that is used as a tank to store up and to recover the product). This machine has a nozzle for dosage that goes up and down all times we approach the bottle for filling near the sensor. This system is not with diving function, the nozzle will go inside the neck of the bottle and the filling will be at level. The time for dosing is timed in order to optimize the speed of production. Special device that permit the fill of metals balls into your bottles. It work pneumatically and the body is made of stainless steel AISI 304.

Automatic parfume filling machine LA1
Automatic perfume filling and crimping line LA1 is the perfect and compact solution for an intense production. The set-up of the machine can be custom made on each client’s needs, so different stations can be mounted on the machine depending on the different packaging needs. A transport belt of various length options, takes the bottles into a star wheel, where bottle cleaning, filling, pre crimping, crimping and collar pressing operations are performed. From the OP panel on the side of the machines all the operations are controlled. STANDARD SET UP - Bottle cleaning nozzle - N°3 volumetric filling pistons - Vacuum levelling nozzle - Automatic pump fitting device - Pneumatic pre-crimping device - Pneumatic crimping device - Automatic collar fitting device - N°2 set of adjustable pucks for regular bottle shapes - Incoming/out coming conveyor belt OPTIONAL EQUIPMENT - Screw tightening station for screw pumps - Automatic vibrating pump and collar sorters (linear and circular) - Manipulator “Pick and Place” device for automatic bottle charging / discharging - External unit placed on transport belt for additional operations such as cap pressing - Perfume Tank 30 liters
Pneumatic crimping head
TPM1 is a simple pneumatic crimping head, suitable for FEA perfume standard diameters 11,13,15,17,18,20mm. TPM1 is so easy to handle that can be moved to reach the bottles anywhere on the work surface; it can be provided, upon request, with a balancer that hanged on a suspended above wire, can take off the weight from the operator’s hand. The machine is on display in our showroom. For more information or an appointment please see our contact information.
Pneumatic crimping machine AP01 / Parfume closingmachine
Pneumatically operated semi automatic crimping machine AP01 is suitable for both glass bottle and aluminum 1” aerosol can crimping. This machine is recommended for medium scale production numbers. AP01 is the only pneumatic machine, within our range, that allows the crimping of aluminum aerosol cans by a simple lever movement. When crimping aerosol cans, please note that AP01 crimp valves internally and only prior to the gas filling operation.
Pneumatic crimping machine AP01 / Parfume closingmachine
Semi-automatic, pneumatic crimping machine AP02 is the right compromise between quality and price for a medium - high production. Versatility and simple use are its main characteristics. Suitable for FEA perfume standard diameters 11,13,15,17,18,20mm. The special features of this machine are the large aluminum base and a set of “catch hands” which hold the bottle in position while crimping. This feature is particularly indicated for tall and narrow bottles, as the catch hands act like a pre crimping operation.

Rotation collection table 1000 mm
Motorized s/steel rotation bottle collection table 1000 mm Technical specifications: Mechanical speed adjustable motor HP 0,5 Motor power 0,37 kW Heavy s/steel base 800 x 500 mm Thermical safety, on/off switch, 4 meter cable with 230V connector Height 900 mm (±100mm)

Labellingmachine System 1 Twist / Automatic labelling machine
The System 1 series includes a range of automatic label applicators for wrap-around applications on cylindrical products. Labelling systems are fully automatic labelling machines with an integrated conveyor system; they are self-sufficient small labelling lines providing for conveying, handling and labelling. They can therefore be used both offline or connected to other packaging machines (e.g. filling machines). Automatic wrapping systems are ideal for labelling cylindrical jars, bottles, vessels, products made of plastic, glass or metal containing food, chemicals and cosmetics.
Labelling machine System 5/2 / Automatic labellingmachine
The System 5 series includes a range of labelling systems for the application on one side, or two sides (recto/verso) of elliptical and quadrangular bottle and products. Labelling systems are fully automatic labelling machines with an integrated conveyor system; they are self-sufficient small labelling lines providing for conveying, handling and labelling. They can therefore be used both offline or connected to other packaging machines (e.g. filling machines). Automatic labelling systems for recto/verso application are ideal for labelling of elliptical or quadrangular jars, bottles, products and vessels made of plastic, glass, tin for the food, chemical , cosmetic market. The series of Systems 5 provides different models, depending on production needs, the equipment of alarms and controls. The systems provide different production speeds, in standard, customized or tailor-made configurations. The modular design allows fitting, on a main machine body a variety of labelling machines of different width and speed, as well as a wide range of ancillary devices that complete the main functions providing for application on 1 side, on 2 sides (recto-verso) combined with top, bottom or tamper-evident , wrap-around labelling (with DRP device).

Allround TB3 tube closingmachine / tubeclosingmachine / tubefilling / Tubes
Semi automatic tube sealing system, type Gandus TB3 suitable for closing and coding PE and laminated tubes. This easy to operate machine closes the tubes and put a coding into the seal in 1 operation. The device is equipped with a digital temperature controller with adjustable temperature setting. Depending on the thickness and the material composition, the heating time and the cooling time are set. This data can be stored per type of tube in a memory so that you only have to put in the settings once. The height-adjustable table is equipped with a scale for the tube height from 100 to 220 mm. and a stop for the tubeholder. Operation: After the tubeholder is placed against the stop, the tubes are pushed upwards into a V-shape true the lever on the side. After this the lever on the front gives a start pulse and closes the seal bar. The seal timer expires the set time and then the set cooling time expires. During the sealing the readout shows the actual sealing temperature. After expiry of the set time, the seal bar opens automaticly and the tubeholder can be removed. During the sealing time, a new tube holder is filled and the actions mentioned can be repeated again. For the tubes with a diameter of 50 mm. 4 can be placed simultaneously in a tubeholder and 40 mm. or all smaller sizes diameters 6 pieces are placed in a tubeholder.
Allround perastaltic pump / fluid fillingmachine
The filling principle provides all the advantages of simple filling and guaranteed easy cleaning. The peristaltic pump is ideal for a production environment in which many different liquids in various batch sizes have to be filled in small volumes. The system has a touchscreen and a logical menu for easy settings and filling parameters. - Hoses can be placed in just a few seconds thanks to the foldable loading mechanism. - Compact size that takes up minimal space. - Speed control - Maintenance-free motor - No risk of product contamination - No cleaning time Affordable peristaltic pump filling machine to fill various liquids.

Neweco ZTA-100 tube closingmachine / tubeclosingmachine / tubefilling / Tubes
The Neweco ZTA-100 aluminium tube crimper is used to crimp (close) aluminum tubes filled with gels, creams or other liquids. The device is operated by one operator who inserts filled tubes, positions them and takes out filled tubes. Technical specification • The device consists of the following elements: - PLC Unitronics controller - Camozzi and Metal Work pneumatic elements - Laser pointers which help the operator to position tubes - Closing jaws - Date and batch number stamping device with set of fonts (optionally) • Process parameters: - Diameter of tubes (possible options): ø13 mm – ø50 mm - Length (height) of tubes: adjusted in the range 50 – 250 mm - Output: up to 500 tubes / hour • Device parameters: - Dimensions (l x w x h): 79 cm x 48 cm x 69 cm - Power supply: 230V, 50Hz - Weight: ~ 48 kg - Installed capacity: 0.2 kW - Air: pressure up to 0.5 MPa, consumption up to 100 l/min • Level of automation: - Inserting and positioning of tubes: manual - Closing (rolling) of tubes: automatic - Removing of closed tubes from the device: manual • The device is made of stainless steel AISI 304 • Operating staff: 1 operator • The machine is manufactured in accordance with the following EC directives and is marked with a CE mark: - Directive 2006/42/WE on machinery and amending Directive 95/16/EC (recast) - Directive 2006/95/WE on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits - Directive 2004/108/WE on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC.

Vertical fillingmachine / GMP fillingmachine / dosingmachine / food / cosmetics / pharma / chemical
Vertical volumetric filler A range of pneumatic vertical dosing machines to bottle liquids in cans, plastic bottles, or other containers Our volumetric dosing machines allow manufacturers to dose liquid or semi-dense liquids - may they be alimentary, cosmetical and/or chemical products. These machines are, for example, the perfect equipment to package oil into tin cans. However, also other alimentary or chemical liquids can be filled into diverse types of packaging. The materials and gaskets of the machine are suitable for the processing of alimentary or chemical products. The structure on wheels makes the machine easy to move around and can thus be easily adapted to any of your needs. The liquid to be bottled can be withdrawn from a storage tank or container based lower than the machine, which works pneumatically on compressed air. Once the requested quantity of product to be dosed is selected, the machine directly aspires the liquid from the storage tank and stops automatically without wasting a single drop of product. The machines are fully customizable to be adapted to the product to be filled and the bottle type used.

2- head vertical fillingmachine / GMP fillingmachine / dosingmachine / food / cosmetics / pharma / chemical
Vertical volumetric filler A range of pneumatic vertical dosing machines to bottle liquids in cans, plastic bottles, or other containers Our volumetric dosing machines allow manufacturers to dose liquid or semi-dense liquids - may they be alimentary, cosmetical and/or chemical products. These machines are, for example, the perfect equipment to package oil into tin cans. However, also other alimentary or chemical liquids can be filled into diverse types of packaging. The materials and gaskets of the machine are suitable for the processing of alimentary or chemical products. The structure on wheels makes the machine easy to move around and can thus be easily adapted to any of your needs. The liquid to be bottled can be withdrawn from a storage tank or container based lower than the machine, which works pneumatically on compressed air. Once the requested quantity of product to be dosed is selected, the machine directly aspires the liquid from the storage tank and stops automatically without wasting a single drop of product. The machines are fully customizable to be adapted to the product to be filled and the bottle type used.

Horizontal cartonningmachine V106N / horizontal cartonningmachine / Boxes / cartons
horizontal cartoning machine model "V106N", intermittent motion, suitable for pre-glued cartons arranged with: . Steel welded frame, containing into protected and hermetic structure all drives and cams . Pre-glued cartons magazine, 600 mm loading capacity (400 cartons) complete with min. level control . Infeed conveyor of the product with adjustable buckets installed on toothed belts, intermitted motion . Positive carton pick-up system from magazine with suction cups and deposit into index conveyor of V106; controls for "no product - no carton" and "carton picked-up" are included . Loading pusher of product with mechanical drive . Motorized hopper performing safe introduction . Rotary folders for inner flaps . End flaps closing with tuck-in, reverse or airplane flaps, mechanical system . Outfeed lateral belts . One size tools . Quick size change-over realized with changing of parts in fixed position without any tool and adjustments through digital indicators; for a complete size change-over max. time 20 minutes . Electrical cabinet at European standards , driven PLC Omron CJ , voltage 220/380 Volts + N.+E., frequency 50 Hz , panel and ancillary equipment at 24 Volts c.c.. . Full colour WEINTEK 7” touch panel to view functions and messages . Mechanical capacity; up to 80 cycles/minute, depending from product and carton specifications. Construction system: . All movements are mechanics, driven by cams . Rotary movements are driven with long-life bearings and axial ones are on hardened and ground shafts and long-life bushings . Motorization achieved with motor + gear box and frequency converter (inverter).

Semi- automatic cap closing machine
Underneath the closing head you can place a bottle / jar of which the cap / lid is not yet tightened. The grip mat prevents that the bottles are turning. The sensor sees the product is present and the closing head is lowered. As soon as the closing head has resistance from the cap / lid starts turning it. When the cap / lid is closed, the closing head will go off up and wait for a fresh start. The machine can also be converted with a simple conversion use as caps - pusher. Different attachments available. - Closing heads made of soft material. - Hard wear resistant metal closing heads specially tailored for your cap. This machine can be delivered from stock and is working in our showroom.